We're Always Here To Help
Reach out to us through any of these support channels
System Management Amplifier
VM-3360VA | |
---|---|
Power source |
230 V AC, 50 / 60 Hz |
Rated output |
360 W (total into 6 zones) |
Frequency response |
50 Hz - 20 kHz (at 1/3 rated output) |
Distortion |
< 0.7 % (at 1 kHz, rated power) |
Power consumption |
850 W (at rated output), 380 W (EN 62368-1) |
S/N ratio |
85 dB (or more) |
Inputs |
Input 1 - 3: -50 dBV (MIC) / -10 dB (LINE) (changeable), 600 Ω, electronically balanced, combined XLR connector (female) / phone jack Input 4: -50 dBV (MIC) / -10 dBV (LINE) (changeable), 600 Ω, electronically balanced, on removable terminal block (14 x 2 pins) BGM 1 - 2: -10 dBV, 10 kΩ unbalanced, RCA pin jack (2 x 2) External amplifier Input: 100 V Line, removable terminal block (14 pins) |
Outputs |
Speaker output 1 – 6: Total within rated output, removable terminal block (14 pins) Direct output from internal or external amplifier, removable terminal block (16 pins) Recording output BGM / Paging 0 dBV, 10 kΩ, unbalanced, RCA pin jack |
Control input |
Control input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: under 2 mA, removable terminal block (14 x 2 pins) |
Control output |
Control output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC, operating current: under 10 mA, removable terminal block (14 x 2 pins) |
Indicator |
Power, 5-segment bargraph level meter, selected zone, emergency zone active, evacuation active, alert active, front panel microphone active, general fault, CPU fault, menu driven LCD for date, IP address, password etc. |
Operating humidity |
5% to 95% RH (no condensation) |